Skip to main content

A television game console produced by Sony Computer Entertainment, also known as PS4. First announced February 20, 2013 and released November 15, 2013.

1696 Questions View all

Can this destroyed pcb be fixed?

Block Image

I don't know, and neither do I want to know what and how the previous owner treated this ps4…

What I know:

-The broken hdmi port has been removed with a drill because they couldn't get the solder to melt…….

-The drill has slipped and hit 2 of the lanes going to the port

-The port has been ripped off taking some pads with it.

I know that soldering a new hdmi port there isn't a problem, but I'm not sure if there is anything that could've been damaged where the holes have been drilled, as the PCB is multilayered.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Chosen Solution

That looks very awful..if it was a very valuable board I’d look into schematics to get a clue on where to get traces and make jumpers but from a purely economical prospective I’d say it’s not worth the time and money at a glance..just my 2 cents..

Was this answer helpful?

Score 1
Add a comment
Most Helpful Answer

Hi .

In my opinion this is fixable … but not as you expected.

In order to have a viable fix in order to use this PS4, you shoul get a HDMI cable ( a cheap one ) but one that has a male an female conector.

The idea is to solder the wires from the HDMI cable directly onto the board - use the end with the female connector.

You cut the cable in half splice it open and with a voltmeter using the continuity test to see wich wire goes to wich pin .

After you solder each wire to the respective pin i woul use the hot glue gun to set everything in place

Was this answer helpful?

Score 2
Add a comment

Add your answer

Ted Fagerholm will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 5

All Time: 825