Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1492 Questions View all

Blank Screen after reassembly

i double read everything twice before reacting. once i reassembled the phone there is no image but only sound. what can i do now?

Update

is there anyone that i could send it to or how much this damage would cost me.

Answered! View the answer I have this problem too

Is this a good question?

Score 0

Comments:

you should be able to fix this yourself. I'd recheck the connector no.1 which can be a bit of a pain and pop off when you close the display back on. the other thing to check is that you have ordered a 3g screen not a 3gs.. the 3gs is larger connector and will seem a bit loose.

by

Add a comment

1 Answer

Chosen Solution

First try a Hard Reset, hold at same time Home and Power buttons for about 15 seconds until iPhone restarts. If this does not work. Then Flex Cable #1 (LCD Flex) needs to be connected to Logic Board correctly.

Was this answer helpful?

Score 0
Add a comment

Add your answer

Thalia will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,290