Rep: 13
1
My xl bravos power washer stops on the spin cycle and stays stuck on 14 for several minutes. Water drains out. It trys to spin but only moves a little. And then the sd code comes on before this happened i would get the ul code but could get it to work .
Is this a good question?
Rep: 690k
3.8k
1.1k
2.6k
This fix has done it for others that have had this problem:
Was this answer helpful?
Rep: 27.8k
113
56
64
The code name “SD” is telling you there is too much suds in the washer, therefore it cannot operate due to that. Try a different soap that suds less and report back.
To address the uL code too, have a look at this article here. I cannot really help you beyond this point if this article does not help.
Was this answer helpful?
I tried not using any soap and it still happened
Past 24 Hours: 1
Past 7 Days: 1
Past 30 Days: 1
All Time: 114
1 Comment
Tried it worked and went back to doing the same thing
by Rice