Fix Your Stuff Community Store

Released September 16, 2016. Models A1661, A1784, and A1785. Available in 32, 128, or 256 GB configurations in Rose gold, gold, silver, black, jet black, and (Product)Red.

1364 Questions View all

Options

Will not power on after replacing charging port

My charging port wasn’t keeping the jack in so I replaced it. After I replaced it and put it back together, I ripped what I believe is the WiFi ribbon. In any case , my device will not power on at all. Nothing on the screen. Nothing when plugged in. Nothing when I plug in and unplug battery. Nothing. I have the part I ripped coming soon to replace. Could that be the problem? It is the small part by the speakers. Right off to the left. Any advice would be helpful.

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

2 Answers

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

can you send a highish-res picture of the part you ripped and the inside of the phone?

It sounds like you are talking about the diversity antenna, but that being ripped should not prevent the phone from at least trying to boot.

There is likely something else going on.

Was this answer helpful?

Yes No
Score 0
Add a comment

Options

Block Image

This

Was this answer helpful?

Yes No
Score 0

1 Comment:

are you able to post a close up of the areas around the connectors in the phone?

by

Add a comment

Add your answer

Susan Colby will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 83