Skip to main content

The Samsung Galaxy Note 5 (called the Note5) is a phablet-style phone with stylus, manufactured by Samsung, released in August 2015.

271 Questions View all

How to clean and fix corrosion off of galaxy note 5

I dropped my galaxy note 5 in some water and tried turning it on to see if works,but when i turn it on all all it only stays in a constant boot loop on the start up screen until the battery is depleted,so i took apart my phone to see that there was corrosion on the motherboard.So I tried cleaning all the corrosion and I waited for everything to dry for 48 hrs then I putted everything but together tried turning if it on and it is still in a boot loop.So i wondering if anybody know how to fix this problem.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

The concept below is similar with all devices, the only major difference is the teardown/disassembly of the unit. One thing I can say about Samsung devices is that if one of the major components is un-cleanable, or burnt out, you may need to replace the part in order to get it back to normal. I found this to be very common in the charging port assembly after liquid contact.

Liquid Damage Details

Courtesy of @oldturkey03

The very first step I would take is to disassemble your phone. Use this teardown to help you disassemble your phone. Take a careful and close look at all components and connectors. Truly assess the damage. Look for major corrosion, evaluate the pins in the connectors etc,. Take a look at all connectors as well as cable ends. You absolutely must remove all the EMI shields. If you do not remove the shields, you are not cleaning the board. Once you got the gross contamination cleaned, use 90%+ isopropyl alcohol and clean your parts some more. For a proper cleaning, use this guide iPhone Liquid Damage Repair. It was written for a Apple iPhonebut it is still pertinent to your phone as well. I can not stress the importance of a good cleaning enough, so do it over and over while replacing the alcohol after each cleaning. Do not use compressed air for the cleaning since that can drive liquid as well as corrosion particles into areas that will cause trouble later on. Do not use drinking water, if you need to use water, use sterile water. Also, you do not need to leave it to dry for a day. Isopropyl alcohol in the higher concentration will evaporate quickly and dissipate the water. The importance here is the cleaning. It would of course be best to get it professionally cleaned Do not forget to replace the battery. This is a must and not an option. It will fail if you do not take care of it now. After that reassemble your phone and re-evaluate. For as long as you have not cleaned your board and replaced the battery, everything is just a guess. Keep in mind that water damage is the hardest to troubleshoot and to repair.

Note 5 Teardown

Good Luck

Samsung Galaxy Note5 Image

Guide

Samsung Galaxy Note5 Teardown

Difficulty:

Moderate

iPhone Image

Guide

iPhone Liquid Damage Repair

Difficulty:

Moderate

1 hour

Was this answer helpful?

Score 2

2 Comments:

hi I wanted to know if you any phone technician companies that i can go to.

by

Best thing to do is google "phone repair shops" in your area.

by

Add a comment

Add your answer

LEGEND will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 4

All Time: 1,404