Skip to main content

Repair information and guides for the Apple iPhone 5s that was announced on September 10, 2013. Model: A1533, A1453, A1457, A1528, A1530, A1518

3530 Questions View all

Device doesn't switch on after change display

Hi everyone.

Although my research inside other similar issues, I couldn't find an specific case like mine.

So, I've changed the display of an Iphone 5S and after all process be done switched on the device and so far couldn't get out of the appple from very first screen.

This apple remains full time show the device is stacked. Tried to reset the device following a clue given by another member - Nellyson112 - but regretfully didin't work.

So, after all and no solution found, any clue about?

IN time, the home buttom isn't so far so good and needs replacement. Is it a possible reason why the device doesn't start up?

Thanks in advance.

Rgds

Marco

Answer this question I have this problem too

Is this a good question?

Score 1
Add a comment

2 Answers

Hey, the homebutton can be the reason for it to not start.

Sometimes the front camera flex needs to disconnect and reconnect. If it was replaced when the screen was, it could be the reason. Then test the first one on rather new screen.

Was this answer helpful?

Score 0
Add a comment

I'm not sure what you are saying, is the phone getting stuck on apple logo?

Is the home button not working correctly?

Was this answer helpful?

Score 0

2 Comments:

Sorry my absence of clear definitions. Yes, the phone is stuck on initial screen. Home button isn't working properly. By the way, my appologies for another mistake. The owner informed me wrongly about this device. Its a Iphone 5, not 5S. Thanks.

by

Try booting the phone up with home button cable and front camera cable unplugged.

Do you know if the phone was working before the screen was changed?

by

Add a comment

Add your answer

Marco Bella Rosa will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 24