Skip to main content

Repair information, troubleshooting tips, and guides for the sixth iteration of Apple iPhone, announced on September 12, 2012. Model: A1428, A1429

2522 Questions View all

After screen replacement why is my phone not allowing me to touch it?

Ive Recently Orderd a new screen from amazon and when i put it on it it turned on but i couldnt touch the screen. Then i disconnected the screen and it re connected it and it didnt turn on at all then i did it again and it had lines through the screen helppl !!

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Make sure that the digitizer cable is properly seated and plugged in all the way. This is the cable that has the longest port, and is the bottom-most cable when plugging the screen cables in.

Was this answer helpful?

Score 0
Add a comment

When you lift the screen to get to the cables it's probably disconnecting - happens all the time just try to lift the screen up onto the rear camera a bit so that you don't have the cables pulling so much. Everything you mentioned sounds like a bad connection.

Was this answer helpful?

Score 0
Add a comment

Add your answer

Nyah ellison will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 37