Rep: 13
1
1
I dropped my Lenovo Phab 2 plus a few days ago. It looks completly fine. No broken screen or touch. Still, half touch is not working. What should I do?
How to fix it?
Should I change my touch screen or complete glass and touch screen?
Thank you in advance!
Is this a good question?
Rep: 48.3k
7
66
97
Whatever the issue is, you need to disassemble it to inspect it.
Here is a video.
https://www.youtube.com/watch?v=IAVdR2By...
1) check for loose cable. If it is loose, make sure it is firmly attatched then reassemble
2) If the screen is at fault, replace the whole assembly.
Was this answer helpful?
Given the symptom, what is the most likely problem area?
Given that it was dropped its either of the 2 things that I mentioned, either a cable came loose, or internal hidden crack on the digitizer. The display is a single piece so replacing the whole assemble is easier than just replacing the digitizer.
Past 24 Hours: 0
Past 7 Days: 2
Past 30 Days: 6
All Time: 5,547
