Rep: 11
2
This iPhone was dropped in the pool for maybe 30 seconds. The only ldi is the one by the SIM card. The rest of them are white. With just the one indicator does that mean something? Like it didn't reach the screen etc? This is a picture of the back of the screen does this indicate water damage on the screen
Is this a good question?
Rep: 221.5k
15
290
807
Based on the picture, it doesn't look like water damaged it, at least, not significantly. The thing to check is the FPC connectors. They are what gets attacked the most by corrosion. Look at it under magnification and probe the individual pins to insure they are making electrical contact with the flex.
Otherwise, if you have 1 LDI that is red, it means water got in. How much damage it did is really anybody's guess. Ideally the logic board, with shields removed, should go through a proper decontamination (ultrasonic bath, Branson EC, IPA rinse etc). Only then do you start testing and probing.
Was this answer helpful?
Removing the battery I (previously) have put the whole back of the phone in the sonic cleaner. Should I do that or just the logicboard
You don't really want to put the RCAM in there...
Which part is rcam?
Rear CAMera, optical parts hate water or cleaning solutions.
Rep: 74k
19
111
82
This looks like aftermarket opening, someone changed the screen or opened the phone before.
Those are finger smudges, another sign of aftermarket screens or phones.
Was this answer helpful?
Yeah I thought about that then i wondered it I put them there trying to disconnect the screen -.-
Also a stamp on the screen so screen has been replaced before.
Looks like a decent job done by someone eating fried chicken while they work.
I'd hire them if they brought me chicken.
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 179
