Released September 16, 2016. Models A1661, A1784, and A1785. Available in 32, 128, or 256 GB configurations in Rose gold, gold, silver, black, jet black, and (Product)Red.

186 Questions View all

Earspeaker/Earpiece not working after screen replacement iPhone 7 Plus

Hello Guys,

I have replaced a iPhone 7 plus screen. After the screen replacement the speaker above does not work anymore. Everything else is working, front cam, proximity sensor etc is all working.

I replaced also the speaker and the flex with new one, but without succes.

Who can please help me out of this problem?

Thanks a lot.

Answered! View the answer I have this problem too

Is this a good question?

Score 1

Comments:

did you try to put back the old speaker? what was the reason to change the flex and the speaker and not use the original ones?

by

Add a comment

3 Answers

Chosen Solution

Problem is fixed! It was a faulty front camera flex. We tried like 4 flex cables (with apple logo original), but only one worked.

Was this answer helpful?

Score 0
Add a comment

I believe I did the same thing today and all you had to do is barely hit the flex or cut it slightly I didn't even cut it what I did was is I somehow split it right at the part where the earpiece connects with 4 for gold pieces are,right at the right corner on the very corner I tried to lift it in the flex like split like basically when you peel off tape,going to try a new flex tomorrow and we'll see what happens

Was this answer helpful?

Score 0
Add a comment

Here's a picture of the damage

Was this answer helpful?

Score 0
Add a comment

Add your answer

Nisay Atsu will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 10

Past 30 Days: 30

All Time: 437