After taking the car for a second service to reduce the revs I still find them higher than when I bought it. The mechanic said all he did was reset the computer. Is there a way I can change the computer settings or how would I go about changing the revs?
Is this a good question?
Rep: 101.2k
8
172
358
countparas, You can not change the cars computer settings with out special scanner/software/knowledge as normally found at a dealership or well equipped shop.
Ask the dealer ship/shop to show you the cars idle speed specifications cold/warm(operating temp.), if idle speed is in the parameters should probably not adjust further. If not in parameters they should correct the issue. Whether by adjustment/faulty sensor, vacuum leak,throttle body sticking/dirty or having to change program in computer. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.
Was this answer helpful?
Rep: 21.8k
31
57
42
Your mechanic needs to set the rev limiter on the computer.
Was this answer helpful?
Past 24 Hours: 1
Past 7 Days: 3
Past 30 Days: 10
All Time: 1,138
