have cinema monitor,plug dont match g4,can it be replaced? possibly with smaller vga type
the back of graphics card,dont have same pin sequence to allow the cinema monitor to work as plug n play,can plug on monitor be replaced or do i need some type of adaptor/convertor?
Is this a good question?
Rep: 685.3k
3.4k
1.1k
2.6k
You probably do better just getting a video card with the right video connector like this one: https://eshop.macsales.com/item/ATI%20Te...
Was this answer helpful?
the male connector is on the monitor and the female is on the tower,but it is a vga socket,not similar to the old monitor socket,thats why im asking if there is some type of connector like a dvi to vga plug/adaptor etc
LOOK at the cards connectors. If these are not what you have, please post a photo.
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 34
