Fix Your Stuff Community Store

Repair information and guides for the Apple iPhone 5s that was announced on September 10, 2013. Model: A1533, A1453, A1457, A1528, A1530, A1518

3530 Questions View all

Options

Screen not working after iPhone5s replacement

I have just replaced an iPhone 5s screen for about the 5th time now and all other times have been fine, however this time the screen hasn't come on at all or won't show if it is charging. It plugs into the computer and a device shows however this is the only thing to show me that the battery is fine.

I'm guessing the problem is with the LCD/digitiser. Has anyone had this problem and if so how was it fixed?

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

It's possible you may have got a bad screen. It can happen. Does your old screen still work?

Was this answer helpful?

Yes No
Score 0

2 Comments:

Nope! Tried the old one but the same problem happened

by

There could be multiple diffrent issues.

I'm assuming you've been disconnecting the battery each time? If not, definitely disconnect it and reconnect it.

You say this is the 5th time, there is a chance some of the screws may have been mixed that keep the retention plate down. If this is the case, you might be suffering from long screw damage.

Or there could be a part on the board itself that's come loose or came off altogether, especially if this is the 5th time it's been repaired.

Or it could just be a simple dirty connection. Clean the connectors on the board and screen with some isopropyl on a q-tip

by

Add a comment

Add your answer

Alex will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 56