when printer head moves to right (facing the printer) side in preparation to print a page a loud hammering sound is heard. If several pages are to be printed only the prior to the first page the hammering sound is heard. But when the printer rests for a short period of time the hammering is heard at next print request.
Is this a good question?
Rep: 1k
4
3
1
The hammering sound is obviously because of slipping of gears or cause of some obstruction.
I experienced such thing once, I inverted the printer in the air by holding down and shook it for a while as, I suspected some obstruction and I was right, luckily some board pins fell off. May work or not for you the gear assembly or the belt should be checked in your case.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 1
All Time: 87
