Skip to main content

Repair information and guides for the iPhone 6 Plus that was released on September 19, 2014. Model: A1522, A1524

1526 Questions View all

Touch IC or connector or both?

Got a 6 plus that is like this, does it need new touch ic or connector?

touch is bad so that needs doing and grey bars at top

the screen is fine, i just want to make sure the phone will display fine if touch IC is fixed

Block Image

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Most Helpful Answer

If you're getting grey bars at the top 100% touch ic guaranteed. I also noticed your top right backlight is dim. If it's still this way after swapping the touch ic you need to replace part of the backlight circuit as well.

Was this answer helpful?

Score 1

3 Comments:

that's what im talking about

by

You know on the top right that is usually either LCD connector on logic board or LCD ribbon cable needs to be pushed in more.

by

it can happen in either corner i have it on a 6 but not sure if it is, it only happened on the 6 because i test screens constantly so it got damaged. the connector looks fine to me

by

Add a comment

Add your answer

David F will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 10

All Time: 136