1 Why is the LED blinking red and orange?
The LED on my cube is constantly blinking red and orange and it will not take any photos or record any video.
Is this a good question?
Score
3
347531
4 Answers
Chosen Solution
Rep: 372
10
3
Your memory card is probably full. Try swapping out your current memory card for one that has space or delete items off your current card to create space
If you have any more issues refer to the troubleshooting page at Polaroid Cube Troubleshooting.
Was this answer helpful?
Score
1
Deleting the items didn’t help. It is still flashing orange to red and doesn’t record. This is the 2nd camera that has done this. It takes about two weeks to stop working.
Was this answer helpful?
Score
0
Formatting the card seemed to have helped. At least temporarily.
Was this answer helpful?
Score
0
I have the same problem. I’ll use the camera on looping mode for several bike rides, but at some point it inevitably stops working - flashing alternating red and orange. When I look at the SD card it’s full (which shouldn’t happen with looping mode, ever) and about half of the video files are corrupted. Only formatting works. On the road, it’s impossible to format the cards though. I have to carry extras with. It’s a deal breaker, I’m shopping for a new camera - but very few seem to make cameras ready for use as dashcams for bicycles. Body worn cameras look more promising.
Was this answer helpful?
Score
0
