Rep: 37
2
1
Hi, recently I changed the rear camera of the iPhone 5. The camera was not working so thats why. But after replacement the phone says No Service, but the phone was receiving signal fine before replacement. I have no idea what caused it. I also tried to replace the entire bottom part because I thought it would be that wire which connect to the logic board is damaged but that did not worked as well.
Is this a good question?
Rep: 91
2
Under the iPhone’s battery plate, there is a silver connector which has to be unscrewed prior to disassembling the iPhone. If this connector has not been replaced properly, the iPhone will fail to connect to a mobile network. Check the post below to deal with the problem:
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 93
