Skip to main content

Repair information and guides for the iPhone 6 Plus that was released on September 19, 2014. Model: A1522, A1524

1525 Questions View all

one iPhone from two broken ones

Hi. I have a broken iPhone 6+, with front speaker not working, as well as mini-jack port. It !#^&@@ me of and i hit my desk several times with it. Now the case is bent quite badly as well. I went to the service with it before the mass destruction and the repair cost was horrific, right now it make even less sence to do it. I'm wondering if it makes sence to buy broken 6+ on the internets and simply swap the logic board and the screen. Would it work afterwards, or the parts are registered to the serial number anyhow. The phone is fully working, with the screen and stuff, but the case is a mess and there's no option to call anybody besides the conference speaker mode.

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Most Helpful Answer

The only paired parts are the logic board and the home button, if these two are intact, the reassembled phone will be 100% functional. If the home button is damaged, replacement buttons will not have Touch ID and reachability but everything else should be OK.

That being said, the damage is already extensive, the bending and multiple impacts may have destroyed the logic board already. You can post a picture of the phone so we can see how bad it is now.

Was this answer helpful?

Score 2

2 Comments:

Of course. Front panel with touch ID is working, and like i said, looks like the case demolition had made no harm to the internals. It can't handle SIM card though as it might not fit due to the bent. Need to figure it out before any work.

https://s21.postimg.org/fiqtm7cuv/Zdje_c...

by

The board probably is beyond help.

by

Add a comment

Add your answer

ignacy will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 75