Fix Your Stuff Community Store

Model A1418 / Late 2012 / 2.7 & 2.9 GHz Core i5 or 3.1 GHz Core i7 Processor

212 Questions View all

Options

Where are the test pins and what are the functions?

Hi,

We know there are some test pins on the logic board for diagnose.

However, I cannot find the technician guide of 21.5-inch imac late 2012.

Could someone tell me where are the test pins and their functions?

Or send me the link of the A1418 technician guide

Thanks a lot!!!

Answer this question I have this problem too

Is this a good question?

Yes No
Score 1
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

There are diagnostics LEDs instead. Near to the PSU connector.

From bottom upwards -

1. Indicates that the computer is turned on. This LED will be ON as long as computer is turned on.

2. Indicates that the computer is turned on. This LED will be ON as long as computer is turned on (but is not asleep) and power supply and voltage regulators are working correctly.

3. Indicates that the computer and the GPU are communicating. This LED will be ON when computer is communicating properly with the GPU.

4. Indicates that the computer and LCD panel are communicating. This LED will be ON when computer is turned on and video signal is being generated. If LED 4 is ON and there is no image on display, then the LCD panel or the cables between LCD and logic board might be installed incorrectly or need replacement.

Block Image

A. Diagnostic LEDs

B. Real-Time Clock (RTC) Reset Pads

C. Coin Battery Voltage Test Pads

Phew.

Hope it helps.

Was this answer helpful?

Yes No
Score 3
Add a comment

Add your answer

Kyle will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 390