Fix Your Stuff Community Store

The iOpener is an insulated, heat-retaining bag that can be heated in a microwave and used to transfer heat to the adhesive along the edge of an iPad or similar device.

22 Questions View all

Options

MacBook Pro LCD Repair

Is this also recommended for use on a Macbook Pro (Mid-2009 Unibody)?

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

I use that. the heat gun and the picks to remove the glass.

iFixit Opening Picks (Set of 6)

Heat Gun

iOpener

Loosen adhesive or reflow solder with this 1500W heat gun. Low setting reaches 570 degrees F (300 degrees C). High setting reaches 1112 degrees F (600 degrees C). Image

Product

Heat Gun

$24.99

Thin prying tool for opening electronic devices. Opening picks are essential to open any iPad, tablet, or smartphone sealed with adhesive. Image

Product

iFixit Opening Picks (Set of 6)

$4.99

No more adhesive battles! With our iOpener, you can quickly and easily remove glued components in electronic devices whether you're a repair professional or beginner. Apply gentle, even heat to loosen the adhesive holding smartphone, tablet, and laptop case components and batteries. Image

Product

iOpener

$24.99

Was this answer helpful?

Yes No
Score 3
Add a comment

Add your answer

takeogarcia will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 202