Rep: 13
1
So, my phone slipped out while running, then I slipped on it. Half the screen is black. Amazing the touch functionality still works, I just can't see it. I can still text and talk with some maneuvering and know how.
How can I replace the backing of the screen? I am impressed with the gorilla glass as the screen itself is fine (after taking my full bodyweight!)
Is this a good question?
Rep: 4k
16
10
13
Hey james, Holger is correct in saying that the whole LCD display must be replaced since the glass cannot be easily removed from the backing. Also, I believe that the new LCD and glass will already be attached together when you purchase the replacement.
A guide for replacing the LCD screen has already been written but will not be visible until iFixit publishes it. It should be viewable sometime in the next two weeks. When it is available, you should be able to find it with this link: Motorola Moto G 3rd Generation Display Replacement
Good luck!
James
Was this answer helpful?
Rep: 85
4
Hi James,
That, I believe, is a bonded assembly. Replace the entire display assembly. There is no guide for that phone here but I suspect its mot that far away from the 2nd Gen. Motorola Moto G 2nd Generation Teardown
Good luck
Holger
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 6
Past 30 Days: 17
All Time: 466
