Rep: 695
9
6
2
I keep receiving an error 70 code when I try taking photos. I turned the camera off and back on, but after several photos the error showed up again. Does anyone know how to fix this?
Is this a good question?
Rep: 25
1
If the automatic sensor cleaning is enabled, it causes an error 70.
That is, the automation solution is put off.
But I do not know what is the reason behind it.
Was this answer helpful?
thanks seems to have solved my problem "THANK YOU"
Rep: 416
11
3
1
This is a memory card read/write error. First try to format the memory card. If the error continues after formatting (or the camera won't let you format the card), try a different memory card. If the error continues with a new card then you probably have an issue with the camera itself. Contact Canon for service. I hope this helps.
Was this answer helpful?
Rep: 13
1
Hey everyone.
My error 70 let me shoot in auto, CA, C1, C2 and C3 on my Canon 7d mark I.
After realizing I need to somehow update my firmware and that you cant update firmware unless in settings P, Tv, Av, M or B Ifound that if I set the camera to video I could use P and update the firmware I had loaded onto a formatted memory card!
Hope this helps someone else!
Was this answer helpful?
I had this problem toobut the solution is to deactivate the autocleaning. The it shoots nornaly
Was this answer helpful?
I have this problem too and have format the card but still writing error 70
Please help me
Have AUTOCLEANING set to OFF
Please check image Sensor
Hi, i fixed this error on my EOS 600D with Tornado EOS program. Do factory reset and problem solved.
Was this answer helpful?
what do you mean Tornado EOS program?
I faced the same issue on my 60D.
Tornado EOS programn is really awesome! I used the free version to upgrade the firmware and problem solved!
Was this answer helpful?
Past 24 Hours: 5
Past 7 Days: 29
Past 30 Days: 110
All Time: 24,911
1 Comment
I get the Err 70 code to and can't do any thing else at all and after about a minute the camera shuts off. any help would be nice thanks
by Chet