Rep: 259
3
11
1
I have broken off the gold looking spring on the logic board, i bourght a solderer to put it back on and now I have lost the bit? where can I get this it is the gold spring part right next to the lcd connector? thanks
Is this a good question?
Rep: 1.1k
6
1
1
I believe the diagram for the home button is like this: http://imageshack.us/photo/my-images/215...
In that image when the digitizer is in place 1 and 2 are in contact with each other and 3 and 4 are in contact with each other. The button just completes the final connection.
A wire soldered between 3 and 4 would do the job if you lost your spring.
As for martinkreis:
The spring is soldered. (see my answer here: gold spring for Homebutton connection )
Was this answer helpful?
Hi,
do you know how this spring is fixed on the logic board?
Is it fixed with a screw or solded?
Which material should I use if I fix it self made?
Same here. I've read other forums where people have soldered a hair-thin wire to bridge the connection between the gold spring and the gold home button. All you need to do is bridge the connection. It is not the sensor that determines when the home button is being pressed, just the connector. That's what I understand.
Was this answer helpful?
I believe the diagram for the home button is like this:
http://imageshack.us/photo/my-images/215...
The button just completes the final connection.
Rep: 1
1
1
Hi,
do you know how this spring is fixed on the logic board?
Is it fixed with a screw or solded?
Which material should I use if I fix it self made?
Was this answer helpful?
my clip has broken off the number 4 in your diagram , can i get a new clip ?
Was this answer helpful?
Could i just use foil?
Was this answer helpful?
for replace clip
It probably will work but not for long. You need something with a bit of "spring" to it so it keeps constant contact with home button.
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 4,953
1 Comment
Help... The same thing happened to me!!
by Pedro