Why is Wi-Fi not working on my Dropcam Pro?
The Dropcam Pro status light is flashing red and blue, and doesn't seem to be connecting to my Wi-Fi.
Is this a good question?
The status light blinking red and blue means that the Dropcam Pro is having trouble locating the Wi-Fi source. This can be caused by it being too far away from the source or having obstructions between it and the source. To fix this problem, try moving the Dropcam Pro closer to the Wi-Fi source and removing any large obstructions that could interfere with the signal. For additional help, check the troubleshooting guide here.
Was this answer helpful?
Past 24 Hours: 4
Past 7 Days: 18
Past 30 Days: 106
All Time: 2,473