Skip to main content

Repair information, troubleshooting tips, and guides for the sixth iteration of Apple iPhone, announced on September 12, 2012. Model: A1428, A1429

2522 Questions View all
Question Closed

I phone 5 replaced screen three times and is still unresponsive

I have replaced my screen and lcd on my iPhone 5 after a drop the cracked screen was still responsive cracked but after I attempted to change it.It all lights up looked good but was unresponsive I tried three screens and retested them all on another phone they worked fine. I cleaned all the connection and reseated them numours times.Ive read the placement of the connector cover can cause a blue screen but not an unresponsive screen and the only thing I've found but is not the case could be a cracked mother board by the battery pull tab? Does any one have a clue?

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Hey B mc

This is what I would do

1. Unplug battery, reset connections one more time and test screen. If the problem persists

2. Check for digitizer connector not missing any pins or being broken. If you do not have a microscope you can try taking a picture in good lightning and zooming in.

Let us know what you find out!

Was this answer helpful?

Score 0

2 Comments:

I tried it again and took a picture all the pins look good and are clean I unhooked the battery and hooked it back up. The only thing I'm not sure of the connector cover lower right screw mount (nut attached to the mother board has come off is there anything that passes under it that could have been broke everything I read says it would cause blue or black screen?

by

Check for any missing components. remove black sticker by connectors and check carefully

by

Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 2

All Time: 92