Fix Your Stuff Community Store

Repair information and guides for the iPhone 6 Plus that was released on September 19, 2014. Model: A1522, A1524

1526 Questions View all

Options

transferring sensor and front camera holder

Just wondering how you guys transfer the little plastic sensor holders and front camera holder. I have a vendor where I get screens where these parts are already installed, but obviously the part is more expensive. When you pull them up, they dont adhere very well and it makes it difficult for the re-assemmbly. Anyways, just wanted to know if there was a way you tack these things back down when transferring them over.

thanks.

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

The plastic holders usually don't need to be glued down, some vendors sell it with them already glued, I usually find them a bit off centred especially when it comes to the camera holder.

What I usually do is just put the plastic holders in, and when you have screwed the metal plate in place, if the camera is off centre, use a plastic spudger to nudge it over to the centre, it works pretty well.

You don't have to worry about the proximity sensor being off as it is a very small space and just sits correctly anyway.

Was this answer helpful?

Yes No
Score 1

1 Comment:

You could also try double sided adhesive to tack it in place if you don't feel like waiting for glue to dry :)

by

Add a comment

Add your answer

Matt Hejl will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 132