Skip to main content

Repair information and guides for the Apple iPhone 5s that was announced on September 10, 2013. Model: A1533, A1453, A1457, A1528, A1530, A1518

3530 Questions View all

Some problems after Battery replace

Hi,

I have changed my battery and i have a lot of problem...

First i have change the battery and i have a problem, the Touch Id doesn't work.

In Settings when i want to activate it, it's written "Fail".

I don't know why, because i have desassembly the phone without problem..

Few days later, i need to charged 3/4 times my iPhone per day and it's a new Battery ( very good quality buy here) and my External Speaker Doesn't Work...

What can i do ?

Answered! View the answer I have this problem too

Is this a good question?

Score 3
1 Comment

Have you tried to restore from itunes?

by

Add a comment

3 Answers

Chosen Solution

You may have accidentally damaged some components during installation. Have you inspected the ribbon cables to see if there is any damage? It's always a good idea to go back through and make sure all the connections are clean and fully seated. You can clean them with isopropyl alcohol on a cotton swab, and make sure they're completely dry before you close up the phone again.

Does the home button click function still work?

Was this answer helpful?

Score 1

1 Comment:

Yes the home button Work, just the Touch ID and the external speaker doesn't work..

by

Add a comment

Download a programme on laptop called ibackup bot it will actually tell you how many times the battery has been charged..

Most new batterys you get are never original and have been charged I've 100 times unless you have a good supplier

Was this answer helpful?

Score 1
Add a comment

I had the same problem, found sensor cable was not seated fully. Took quiet a few goes to get it right.

Was this answer helpful?

Score 0
Add a comment

Add your answer

robinphi58 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 189