Skip to main content

Model No. A1367 / 8, 16, 32, or 64 GB capacity

915 Questions View all

will not power up after screen replacement.

replaced screen and it would not power up. Tried shorting the battery and got a white screen for a few seconds then it went dead again. The little spring was missing when I opened it, but it was working when screen got cracked. I've taking it apart several times to short the battery but all attempts have been unsuccessful. Tried plugging it in and still got nothing.

Answer this question I have this problem too

Is this a good question?

Score -1
Add a comment

2 Answers

Most Helpful Answer

Do you try reconnecting the old lcd to see if there was any luck? Also try a restore in iTunes.

Was this answer helpful?

Score 1
Add a comment

As Brian said.

Does itunes recognise it?

I always ask the customer to drop battery down to about 10% as that way, when I get the white screen, I can easily run the battery out.

Have you inspected the board carefully where you removed the stuck down shield to see if any of the components have come off?

Was this answer helpful?

Score 0
Add a comment

Add your answer

chillnh3 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 65