Questions
-
Trying to identify mosfet partHi Im trying to identify a mosfet part from a dead xbox one s. all i can read on there is 4C50 rh41 But cant find anything on...
-
Unknown error (4000) when restoring iPhoneJust had a customer give me a phone which is in boot loop. Plugged a new screen on, as the glass is broken, along with the ho...
-
Calls on receiving end very distorted.I done a charging port, like many before. But this time, the customer then said, when calls are made on the phone, it's very ...
-
What types of tools are you all using.Been doing repairs for about 5 years. And have gone through many types of mini screwdrivers trying them out, and if I'm hones...
-
Mac not powering up.I've been doing phone repairs for a few years, and a friend has an iMac A1224 which won't turn on. So said I'll have a look, ...
-
Stuck on Apple logoI was given an iPhone 7 plus for a screen replacement. Bloke handed it over and pretty much rushed off. So with that, I thoug...
-
Replacing the back glass on iPhone 8/8+Has anyone done this yet? All I've seen is that's it's very difficult, and expensive? From pictures, I gather you don't need ...
-
LCD Freeze machine for glass only repairsHi all. Been repairing phones since the 3gs, and do all the phone ranges, including Samsung glass only… up until the S6 when ...
-
Touch not working on IOS 11?Hi I know there's bits about this already. But hoping there's more of a definate answer? Had a 6s come back to me, which has ...
-
Something to use to separate lcd & frameI do the odd Samsung glass repairs, but the newer ones are obviously more of a pain. Rather than using cards to try and separ...
Answers
-
Answer to: iPhone 7 plus is randomly shutting down after charging replacementAs mentioned, sometimes the replacement part is defective. I’ve has the same symptoms as this on an iphone 7 before, and it was the replacement charging port which was causing the issue.
-
Answer to: iPhone 7 screen pressing stuff by itselfdouble check the connections are fully seated for the lcd. Have you slightly crimped the flex cable when fitting the screen into the housing? Else, you have a defective screen.
-
Answer to: Touch id not working after replacementIf you're sure you never damaged the original home button, and it looks all in tact, and cleaned on the connector, and the logic board pins are clean. Then possibly, the LCD backplate which contains the flex cable for the home button could be damaged. It's worth replacing that. If not, then you'll need someone who is God at micro soldering, to transfer the components over to a new home button, which can be very tricky without damaging the new home button flex.
-
Answer to: iPhone 6s | Ribon Cable has been cutRemove the camera & speaker flex. It looks like it could be that one. As the smaller one is for the home button, and the other one which isn't cut, I think is for the LCD. If that part of the cable is from the camera flex, then you need a new front camera. If it's not, then you'll need a new LCD. You won't be changing the LCD flex without any proffesional refurbing kit.
-
Answer to: What makes touch ID not work?Either the home button was damaged. Or the flex cable on the screen is damaged. If the old LCD is still working. Put the original home button back on that screen, and test it on there. If it's still the same, most likely damaged the button.
-
Answer to: Ipad Mini Home Button Not Responding And Touch Screen Not WorkingFirst thing would be to replace the front glass/digitiser with the IC connector assembly pre soldered.
-
Answer to: Correct glue for replacement screen?That B7000 glue is good, easy to control the flow too, and doesn't dry like super glue so it's not brittle when dry.
-
Answer to: Yellow color merges on the top screenHas it been recently replaced? If so, sounds like the metal Sheild on the flex maybe too high/low pushing pressure on the lcd. Is the yellowing large, or small?
-
Answer to: Unique iPhone Power ProblemYou ideally need to remove the emi shields, if it's got damp, components are most likely to have corroded. If you can't get the shields off, Litterally put the board in a bath of isopropyl, then leave to fully dry. Then, use a new battery, and unplug everything on the board except the lcd, power flex & battery and see if it boots up, if so, plug in another component one by one until the fault occurs again (if any) which may indicate that part. Also, don't forget to clean the female connectors not just what's on the board. Also, iTunes errors can also be caused by non genuine leads, I've had this before, and a decent/genuine cable worked. Good luck
-
Answer to: Elite control Paddles not click inRing Microsoft. I've had 2 controllers changed! They said that's it's past the Warrenty, but I kicked off and said that's unacceptable for a premium product. I've had a 360 controller which lasted 7 years!!!!!! They agreed in the end to replace both controllers, and had the replacements in about a week from sending mine off each time. So I'd expect this type of controller to last at least a couple of years easily. You can use the clause (depending if the laws are the same) not fit for purpose! Sure there's lots of great advise, but I get really annoyed that this stiff happens, and they try and shy away from it. Once you get another one in return, you got a fresh Warrenty.
Active Hours
The time of day that you have been active over the last 90 days. Each line on this graph is an action you performed on the site (we only count major actions, like voting and editing posts). The numbers on the bottom of the graph are the hour of the day in Mountain Standard Time.
Reputation over time
Reputation Breakdown
| Event | Count | Delta |
|---|---|---|
| Post was voted up | 76 | 912 |
| Answer accepted | 8 | 240 |
| Accepted answer | 4 | 40 |
Badges
860488
Recent Notifications
Mark all as read
Show:
All
All
Unread
You're on top of things! No new notifications.
-
Muhammed rayhan commented on "Replacing the back glass on iPhone 8/8+"
-
You were awarded the Popular Question badge!
-
@screendoctor68 answered 'Replacing the back glass on iPhone 8/8+'
-
@slot1gamer answered 'Trying to identify mosfet part'
-
peter.lukac accepted your answer to 'iPhone 7 plus is randomly shutting down after charging replacement'
-
You were awarded the Popular Question badge!
-
peter.lukac commented on your answer to "iPhone 7 plus is randomly shutting down after charging replacement"
-
You were awarded the Good Question badge!
-
nzmturkan commented on your answer to "iPhone 6s | Ribon Cable has been cut"
-
Jason Houdek commented on your answer to "Touch id not working after replacement"
-
@bobcat1981 answered 'Replacing the back glass on iPhone 8/8+'
-
@tech_ni answered 'Unknown error (4000) when restoring iPhone'
-
@fletchertime answered 'Unknown error (4000) when restoring iPhone'
-
cynthten answered 'Replacing the back glass on iPhone 8/8+'
-
@mayer answered 'What types of tools are you all using.'
-
@sparkcad answered 'Replacing the back glass on iPhone 8/8+'
-
@luco_beato answered 'Replacing the back glass on iPhone 8/8+'
-
@refectio answered 'Calls on receiving end very distorted.'
-
@nocturnity answered 'Calls on receiving end very distorted.'
-
Ben commented on your answer to "Correct glue for replacement screen?"
-
mcadoni commented on your answer to "Correct glue for replacement screen?"
-
@devinkott accepted your answer to 'What makes touch ID not work?'
-
Devin Kott commented on your answer to "What makes touch ID not work?"
-
Devin Kott commented on your answer to "What makes touch ID not work?"
-
You were awarded the Nice Question badge!
-
Tina whatsapp008618813643652 answered 'anyone used OCA machines?'
-
Sherry Li answered 'Wholesale for iPhone lcd'
-
Sherry Li commented on "Wholesale for iPhone lcd"
-
Sherry Li commented on "Wholesale for iPhone lcd"
-
@benjamen50 answered 'What types of tools are you all using.'
-
@refectio answered 'What types of tools are you all using.'
-
@chrisbross answered 'clone SSD to bigger one.'
-
Kirk Pomerleau commented on your answer to "My drone does not take off."
-
سامح وحيد commented on your answer to "Loca or oca for replacing glass?"
-
You were awarded the Nice Question badge!
-
@jessabethany answered 'Stuck on Apple logo'
-
You were awarded the Popular Question badge!
-
You were awarded the Popular Question badge!
-
@cellphonecare answered 'Stuck on Apple logo'
-
Ron Bronwick answered 'Stuck on Apple logo'
-
Chuck commented on "Stuck on Apple logo"
-
Sunil Kamala commented on "Stuck on Apple logo"
-
@rany answered 'Stuck on Apple logo'
-
Carol Edward commented on "Stuck on Apple logo"
-
Baladeva Ratna answered 'Stuck on Apple logo'
-
@moffit answered 'Replacing the back glass on iPhone 8/8+'
-
@katerinaryland answered 'Touch not working on IOS 11?'
-
@tomchai answered 'Replacing the back glass on iPhone 8/8+'
-
@techspot_now answered 'Mac not powering up.'
-
Fichn1946 answered 'How to unlock from a network'
- View More...