Help me identifying resistors next to powerflex connector
Hello, can someone tell me what resistors or chips are missing, what componentnumbers they have?
See image.
Thank you.
Kind regards,
Is this a good question?
Hello, can someone tell me what resistors or chips are missing, what componentnumbers they have?
See image.
Thank you.
Kind regards,
Is this a good question?
Patrick,it is not a resistor. That is reference designator Q8 which is a DMN3730UFB4 V N-CHANNEL ENHANCEMENT MODE MOSFET and is available at places like this.
That is DZ1 which is a 12V 33PF Zener diode in a 1005 package. Please remember the size of a 1005 package is only 0.4 mm × 0.2 mm, so it will require special skills and tools to solder.
Was this answer helpful?
Thank you very much. And beside Q8, there is also a tiny (resistor) missing. Sorry but my technical English is very bad.
can you point to it on the picture so we know where you see it missing?
I reuploaded a picture so you can see better. This little part has also been ripped off. Thank you.
Perfect, thanks
Past 24 Hours: 0
Past 7 Days: 1
Past 30 Days: 2
All Time: 210