Canon PowerShot A series point and shoot camera released in 2006, with a 6.0 Megapixel camera and 4x optical zoom lens.

7 Questions View all

recently started taking solid black pictures

up until recently, my camera works perfectly. Then about a week ago, it started taking solid black pictures. When trying to take a photo I can only see black in the screen. However, I can see previously taken pictures in the screen. I saw this problem listed under the S series. I tried the resolution by looking down the zoom lens,but I can see the "Flicker". Could this be something else? How can I fix it?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Shelly, could be that the OPTICAL UNIT is defective. (The shutter in the LENS part is not opening). It is also possible that you have a CCD sensor error. Usually a replacement of the lens assembly will resolve it, but there is always a possibility that it is an issue of the CCD circuitry on the mainboard. I'd start with a new lens. Hope this helps, good luck.

Was this answer helpful?

Score 1
Add a comment

Add your answer

Shelly will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 139