Fix Your Stuff Community Store

Tefal Actifry - Convection Cooker. First launched in 2006, this revolutionary, versatile fryer allows you to cook a wide range of meals economically and its also safer and easier to clean than other fryers

13 Questions View all

Options

Replacing the heating ellement

Replacing the heating ellement in a Tefal Actifry

Answer this question I have this problem too

Is this a good question?

Yes No
Score 4

1 Comment:

The paddle stopped turning on mine and after fitting a replacement motor the heater and fan did not work but the paddle did. After careful examination of the circuit board I noticed that the larger of the two fuses had blown. It looks like an antisurge fuse and it was very difficult to see if it was blown but my meter confirmed it was U/S. Unfortunately the fuse needs to be desoldered and a replacement soldered back onto the circuit board. All good afterwards. Tefal need to think about their philosophy and try to make stuff that lasts longer than 12 months and is also easier to repair.

by

Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

follow the guide for the paddle motor, the heatin element module can be prised out gently using a screwdriver and the 2 black leads removed from the PCB board.

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

Mike will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 20

All Time: 3,050