Why is the trigger on the saw sticking?
When the trigger on the saw is pressed to turn it on, the button sticks and it stays on
Is this a good question?
When the trigger on the saw is pressed to turn it on, the button sticks and it stays on
Is this a good question?
That is a very dangerous situation. I would stop using the saw until it was repaired.
If there's no physical reason (crud or debris in the return) the switch is likely shorting out in the on position.
If this answer is acceptable please remember to return and mark it.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 4
Past 30 Days: 10
All Time: 310