Why is it malfunctioning after replacing the battery?

I have replaced the battery as directed. The display lit up, with a blank screen upon powering up...but that's all. After approximately 2 minutes it beeped twice, and there were dark bands on the lower area of the LCD display. Now it just beeps every 2 minutes.

After being plugged into a charging dock for 30+ minutes the lower half of the display has alternating bands of black and dark grey, and is still beeping twice every 2 minutes.

I used a soldering iron that was not calibrated...might I have fried the pcb?

Answer this question I have this problem too

Is this a good question?

Score 1
Add a comment
Deck the Halls
With tools and Fix Kits

1 Answer

The problem you describe is due to damage to the screen.

The beep you describe maybe that replacement battery that is not good ..

If I were you I would try to change the screen display, do not think that damage to the PCB because it lights up.

Was this answer helpful?

Score 0
Add a comment

Add your answer

maryellenhart will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 198