Options

Not sure if I have a battery

I replaced my magsafe connector and the battery on my MacBook Unibody Model A1342 at the same time. Now I have no power without the laptop being plugged in.

I had kind of accepted the fact that I fried my logic board however it seems that now when it is unplugged it keeps it's state in memory, like it's waking up from a deep sleep. It goes to sleep and sometimes shuts down when I unplug it. Does not wake up unless it is plugged in and I press the power button.

I tried switching back to the old magsafe connector and battery but it did not change anything. Is my logic board fried or is it something else?

Answered! View the answer I have this problem too

Is this a good question?

Yes No

Score 0

1 Comment

I did reset PRAM and tried to reset SMC. no luck

Jun 11, 2014 by raharrod

Add a comment

Posted: Jun 11, 2014

Options

You need to know what's going on with your battery. Download and run Coconut Battery and let us know your results: http://www.coconut-flavour.com/coconutba...

Was this answer helpful?

Yes No

Score 1

3 Comments:

BATTERY STATUS: good, Battery temp: 35.2, Charging with: 0.0 watts, Battery state: discharging

It always says it's at 99%

Jun 11, 2014 by raharrod

It's like there is a connection to the battery but it is only very slight.

Jun 12, 2014 by raharrod

Put the old battery back in and run Coconut Battery.

Jun 12, 2014 by mayer

Add a comment