Connector on logic board for right fan broke off?

Is there any chance to reconnect the right fan to the logic board after the connector on the logic board broke off or can it at least be repaired?

Or do I need to replace the logic board?

Answered! View the answer I have this problem too

Is this a good question?

Score 0


You could solder it back on. Post an image with your question so we can see the damage. Also, what are the last three digits of your computers serial number? That will allow us to properly identify your computer.


Add a comment

1 Answer

Chosen Solution

A professional computer or small electronics repair shop could do this. Soldering logic boards is not for amateur DIYers… it requires lots of practice, special tools and skills. You can easily destroy logic boards with too much heat.

If this answer is acceptable please remember to return and mark it.

Was this answer helpful?

Score 1


Thanks. Will try to find a repair shop that is reputable and does not overcharge.


Add a comment

Add your answer

Michael will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 96