Fifth generation of iPhone. Repair of this device is straightforward, and requires screwdrivers, prying tools, and patience. GSM/CDMA / 16, 32, or 64 GB / Black or White.

2865 Questions View all

iPhone 4s LED flash problem

Hello everyone. I hope this is the right place to ask. Because I don't really know it is a software problem or a hardware problem.

I have a problem with my iPhone 4s LED flash. When I take a picture with the flash turned on, the picture become blueish or something like that. I think the problem occurred after I updated the iOS from 6.x to 7.

Can anyone identify the problem and solution to fix the problem?

Thank you.

Sample :

Block Image

Sorry for my bad English. I hope everyone understand my question. :D

Answer this question I have this problem too

Is this a good question?

Score 1

Comments:

cant understand if the picture you took is a test shot to test the camera or to show us your phone. cause that's not a 4S. please specify.

by

Add a comment

1 Answer

Most Helpful Answer

This type of issue is often just interference with the flash, either from a case, a screen protector, or some other cause (such as a finger too close to the flash). I don't know of any specific issues with flash between iOS6 --> iOS7. Have you already tried taking a picture without your case on to see if you have the same effect? Or perhaps a bit of plastic from a screen protector is too close to the flash? Sorry if this isn't your particular problem, but those seem to be the most common causes for this.

Was this answer helpful?

Score 1
Add a comment

Add your answer

Warnerin will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 12

All Time: 927