Fifth generation of iPhone. Repair of this device is straightforward, and requires screwdrivers, prying tools, and patience. GSM/CDMA / 16, 32, or 64 GB / Black or White.

2896 Questions View all

Will not restore, error code 4013.

Tried to restore iphone 4s but keeps showing error 4013, any ideas? :)

Best regards Tom.

Answered! View the answer I have this problem too

Is this a good question?

Score 35

Comments:

you add code for me now

by

i have iphon 6 plus .this device prablem is 4013 itunes error how to trubleshoot please guide me

by

Add a comment

20 Answers

Chosen Solution

hello my all friend i have same problem on my iphone 5s itune restore error 4013 after i change the u2 charging ic is fix. try it

Was this answer helpful?

Score 6

Comments:

Really??. Do you know step by step manual or written bullets?.

Regards,

rnavarrete@okemosolutions.com

by

After u change what?? U2

by

YES, when you resolved the U2 Problem like Error 4013 or NAND for the iphone 5s too. Pleases HELP!!. rnavarrete@okemosolutions.com

by

I wonder if this error is solvable and if so, what steps should I take to fix it ... thanks

my e-mail barbosa.200@hotmail.com

by

Here is a step by step tutorial on how to fix it: http://goo.gl/fa87Iv

by

Show 1 more comment

Add a comment
Most Helpful Answer

I figured out how to fix this - this worked for both my and my friend's iPhones.

1. Connect to iTunes in recovery mode, start recovery.

2. When you see the "Spinning wheel" on iPhone's screen - EJECT THE CABLE IMMEDIATELY.

Wait for 10 seconds

3. Reinsert the cable - the restoration process will begin.

Looks like Apple has a faulty algorithm that marks some iPhones as damaged even if they are not(or they simply want you to buy more new devices :)).

Was this answer helpful?

Score 8

Comments:

Awesome...this worked for me. Thank you

by

everytime i do this it turns right back off

by

the bar would come up then turn right off after 5 secs

by

your problem is a battery then @peeweeabc

by

some problem , it works thank you so mach

by

Show 3 more comments

Add a comment

full open the phone connect only battery and charging strip and restore 100% working

Was this answer helpful?

Score 3

Comments:

This is Working for me in my IP5C. Remove the lcd completely and itunes restore and upgrade smoothly without error. I guess iphone does not recognize new lcd (original broke, so i change another lcd).

by

Add a comment

When I had this error in the past it was with a NAND error (FlashMediaAndKeepout.............. PROVIDER <PTR....) It was the SCREEN.

Was this answer helpful?

Score 3
Add a comment

Hey Tom,

This is a solution to your problem:

http://support.apple.com/kb/TS5314

Tell me how it goes.

Hope it helped. Have a nice day!

Was this answer helpful?

Score 2

Comments:

Yes this is what I needed someone to google the error and give a link. Haven’t thought of that

by

And those solutions don’t work

by

Add a comment

Solution 1: Reboot your iPhone

Solution 2: Check Out the Faulty Cable/Port

Solution 3: Is Wi-Fi Network Working Properly?

Solution 4: Clean Up Your iPhone

Solution 5: Restart Your Computer, Reset Your iPhone....

You can click the tutorials for detailed information: How to Fix Error 9, 4005, 4013 or 4014 in iTunes/3uTools?

Was this answer helpful?

Score 2
Add a comment

4013 on 4s is usually the nand flash or baseband chip gone bad. Not worth fixing a 4s these days when it comes to those issues.

Was this answer helpful?

Score 2
Add a comment

IF you have a MACBOOK it's tested just restore it in your MAC

Was this answer helpful?

Score 1
Add a comment

Because of copy version Lcd.

Was this answer helpful?

Score 1
Add a comment

This method worked for me http://feedstech.com/5-ways-fix-itunes-e...

Was this answer helpful?

Score 0

Comments:

Thanks for your share , also i have a way to rectieve lsot data from iPhone

https://www.tunesbro.com/recover-deleted...

by

Add a comment

I would say disconnect the the last cable to iPhone logic board and try again!! Or if you have a old 4s screen try it but don't hook up last cable and see if that fixes it

Was this answer helpful?

Score 0
Add a comment

Error 4013 I due to security software issues . uninstall ITUNE your computer completely restert your computer and reinstall the iTune latest version try again your iPhone restoring ...,...same problems iPhone 5 5s iTunes error 4013 is hardware change the charging connected ic and compass ic is fix .and try it I am from pk

Was this answer helpful?

Score 0
Add a comment

I found a solution that worked for me. Tested with iPhone 5 GSM. Here's the fix http://bit.ly/1P3yQDM

Was this answer helpful?

Score 0
Add a comment

I have an iPhone 5c that worked well But it did not work network constantly to pen that is looking for , and last night I went to reset to factory settings and has failed , threw me a mistake 4013th

Did he know who the problem , I put a new screen and new battery

Update (03/05/2016)

I have an iPhone 5c which had not worked networks , and last night I went to reboot I got stuck at half load, I threw the error 4013 , was helpful before and everything was working normally

Network did not work , constantly it says that asks , I was trying to do over the item But in vain ,

And he put a new screen , home button and battery

Was this answer helpful?

Score 0
Add a comment

1: try change battery and charging port to a new one,

2: try put on a new or secind hand screen,

3 try another cord:

4: make sure itunes is the newest version

Was this answer helpful?

Score 0
Add a comment

Error 1405,4005 on iPhone 6,6 plus.

Complete solution follow the steps bellow _

Remove the Top metal plate of charger and battery connectors,

Connect the phone with itunes and start restore for restoring.

For this step you need to have a heat gun low down the heat to 160 and make the air to high presser start heating up the battery and charger port connectors warm up.

when the phone goes off wait for a while and when you see the restoring precess give it more heat for a few minutes,Then release the heat Gun and see the magic.

100% solution.

Was this answer helpful?

Score 0

Comments:

please give me your facebook or email i didn't understand the solutin that you give

by

send2_iqbal@hotmail.co.uk

by

I solved my problem not with your solution but it cost 100 euro you reply too late but np thank you :)

by

Add a comment

I had this exact problem on my iPhone 5c. Error 4001 when I tried to restore and error 4013 when I tried to update. After some quick google searching, I then REMOVED THE SCREEN and tried the process again.

100% working now. It's apparently an LCD issue.. usually caused by a faulty Proximity Sensor.

Was this answer helpful?

Score 0

Comments:

I did this on my 4S but no help . My phone is stuck in recovery mode so i tried dr.fone by wondershare it did took it out but then it was in boot loop so i tried restoring with itunes it gave an 4013 error should i check the battery and wifi antena plug ?

by

Add a comment

Is it true? I generally retieve messages and contacts, photos from iPhone with ios rescure app, but I used the trail version, the trail version can recover up to 30 files. you can try, maybe it can recover your lost data

Was this answer helpful?

Score 0
Add a comment

Repaired lots of iPhone 6 recently and error 4013 is being caused by a faulty front camera ribbon- there's a few components on the one ribbon. Replace it and problem solved or if your stuck disconnect it and reboot the handset, it'll boot up again. Then reconnect it whilst the handsets on and it'll stay on but if it does happen to power of it won't boot up again as it's picking up the faulty ribbon on its boot check. So replace it when you can!

Was this answer helpful?

Score 0
Add a comment

This may or may not be useful to those having issues: I have an iPhone 6s, and got the dreaded 4013 error. Tried many things--restarting phone, computer, etc., reconnecting cords to different ports, disconnecting them at pivotal moments. The last thing I thought to try was to take the phone out of its battery case (which I got fairly recently). That did it--made all the difference. Update went smoothly after that. This may not be the same thing plaguing others, but it definitely made it work for me.

Was this answer helpful?

Score 0
Add a comment

Add your answer

Tom will be eternally grateful.
View Statistics:

Past 24 Hours: 222

Past 7 Days: 1,832

Past 30 Days: 7,947

All Time: 125,002