I replaced the display on my A1342, and the image is perfect. Works great. However, when I close the lid and open it again, the display is black again. I forced a shut down by holding down the power button and started it up again, and the display image was bright and clear again. But once again when I closed the lid and reopened it it was black. Any suggestions?
Is this a good question?
Rep: 116.3k
66
68
359
Don't close the lid until you're ready to shutdown the computer. Check the position of the sleep sensor magnets. Verify it's not a software issue
If this answer is acceptable please remember to return and mark it.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 115
