Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

3205 Questions View all

part inside iPhone 4

Block Image

While replacing my iphone 4 screen I noticed a small black piece with a groove in it and i dont know where it goes back. It is about one centimeter long and the heighth of a few sheets of paper and it has a groove in it. It appears to fasten on somewhere for possible protection or a spacer and it is rubber. can someone help? Thanks

Answered! View the answer I have this problem too

Is this a good question?

Score 0

Comments:

Can you take a photo of it and post it here, we should be able to identify it for you then.

by

i cant seem to get a picture uploaded. How do I do that?

by

I uploaded a image but i dont see it on here

by

Add a comment

1 Answer

Chosen Solution

That is the front screen flex cables bumper cushion. It is not a necessary part, but is designed to protect the cables. It sits at top edge of logic board (with groove holding logic board) under the screen flex cables.

Was this answer helpful?

Score 1

Comments:

ok.. thanks alot

by

Add a comment

Add your answer

doug will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 87