PSU Test Fail Confirmation
I have an a1224 emc 2210 that won't fire when you hit the switch. I have #1 led lit up but nothing happens when you press the button. I checked continuity on the power button- definitely working. I then went to the power supply and got the following readings from each pin-
1-0v
2-0v
3-0v
4-0v
5-1.16v
6-0v
7-0v
8-0v
9-3.41v
10-0v
I'll assume it was in the standby mode..but either way these numbers seem off compared to what I should be seeing..
Any confirmation here would be great- I'm new so take it easy, just want to see if it looks like psu is bad..
Thanks in advance.
Is this a good question?