Skip to main content

Late 2011 model, A1278 / 2.4 GHz i5 or 2.8 GHz i7 processor.

592 Questions View all
Question Closed

Why I did that

[[[[URL|URL]|URL]|URL]|i have problem please help me there are 3 wires in the matherbord i could not return it back and i need you to see the pic and tell me how i can do it there are 3 wire 1 black , another black but a lettle biger and Gray please see the links.

Block Image

http://j.mp/YKXucT

Block Image

http://j.mp/YKXyt8

Block Image

http://j.mp/Yuh9Sn]

Answered! View the answer I have this problem too

Is this a good question?

Score 0
3 Comments

I am not a Mac person, but do enjoy hardware and have some of the service manuals. What are the last three digits of your serial number? that way I can may be find the schematic and can help you out a bit better. I am certain that the Mac Gurus will be able to help you without any problems.

by

Its. (v14). ،

by

Thank you so much

by

Add a comment

2 Answers

Chosen Solution

That is the microphone cable. If you still have the square connector that the prongs pulled out of

they will slide back in with a little force check the guide to align the right colors. If not you can just buy replacement I don't think price for used one is that high.

Was this answer helpful?

Score 1
Add a comment

Mahdi, take a look at step 25 of this guide. It shows your cable and it looks like Grey, thick black, thin black. Hope this helps, good luck.

Was this answer helpful?

Score 0
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 163