Model A1312 / Mid 2010 / 3.2 GHz Core i3 or 2.8 & 3.6 GHz Core i5 or 2.93 GHz Core i7

260 Questions View all

Replacing the video synchronisation cable

Hello,

Unfortunatly while tearing down my new iMac (to change the Internal HardDrive) something went wrong (%&#* clumsiness lol) and the 4 pin synchronisation video cable was scratched (which link the 27" screen and the board to left of the alimentation unit).

Does anyone know where I can find some replacement cable ? I've looked everywhere unsuccessfully :-(

Thanks a lot for any response !

Answered! View the answer I have this problem too

Is this a good question?

Score 1

Comments:

Thanks for your response.. i've looked on the apple site and call a tech center. Unfortunatly degradations due to bad manutention break the warranty as i supposed :-(

I've managed to "fix" the cable but a new one would not be luxury lol

Here again, any clue would be very helpfull, thanks !

by

Add a comment
Deck the Halls
With tools and Fix Kits

4 Answers

Chosen Solution

This machine was still under warranty. Parts will be very hard to find as it is so new. It might still be covered if it was in the original condition.

Was this answer helpful?

Score 2
Add a comment

Apple's part number for the VSYNC cable for this model is 922-9161, hope this helps.

Chris

Was this answer helpful?

Score 2
Add a comment

I "googled" it but no relevant result :-( I'll keep the part N° however and thanks for the intell ;-)

Was this answer helpful?

Score 1
Add a comment

Applecomponents 64NE FARRAGUT ST. PORTLAND OR. 97211-2206 . I purchased this cable from them.Best of luck!

Was this answer helpful?

Score 0
Add a comment

Add your answer

fpeliss will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 2,073