Skip to main content

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White. This page aims to help users troubleshoot, fix, and seek help for the iPhone 4.

2397 Questions View all

About replacement screws locations

Hi,

I Removed all the screws from my iPhone 4, Because I Replaced the Home Button....

And throw them to the garbage....

Now I Have full replacement kit of screws...

And I Dont know Where every screw connected....

What can I Do??

Sorry my bad english......

Thanks...

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Chosen Solution

Thedag, you can check this [http://p://www.powerbookmedic.com/wordpress/2011/06/02/iphone-4-screw-location-explanation-part-1|great link] I also attached an image that might help you out. Another thing you can do is check the individual guides on here and read through the steps. It will tell you exactly which screw goes where. Hope this helps, good luck.

Block Image

Was this answer helpful?

Score 1
Add a comment

You have to sort then out carefully. About half are unique and sort those first. The Six huge head those are easy. The longest, inside Vibrate Motor. Next longest, top Wifi. I believe next longest is Battery. Very small, with only beveled head of all the screws, outside of Dock Flex Plate. Stand-Off needing flat head driver, top right logic board at headphone jack. You get the idea, just sort them out.

Was this answer helpful?

Score 0
Add a comment

Add your answer

Thedag will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 873