Fix Your Stuff Community Store

Free Shipping on Domestic Orders $75+

Soldering Iron Repair Forum

Ask
Learn How It Works Ask a Question

Only 1 of 12 questions in the past 3 months has no reply - Help answer it!

91%
All Questions
Soldering Iron

Soldering Iron newest threads

clear
Newest
All Most Helpful Unanswered Newest
All Questions
FixHub Smart Soldering Iron
1 Answer
Smart Soldering Iron cools down immediately after reaching target temperature with no error codes

FixHub Smart Soldering Iron 1 Answer

Kris Rodriguez 309.2k

Answered

answered by Kris Rodriguez

GaoJie Soldering
1 Answer
Gaojie 100 watt soldering iron heater units

GaoJie Soldering 1 Answer

DanJ 500.3k

Answer edited

answer edited by DanJ

FixHub Portable Power Station
0 Answers
My Station is not charging anywhere near 2.25A at 20V

unanswered FixHub Portable Power Station 0 Answers

Grant Kennedy

Asked

asked by Grant Kennedy

FixHub Smart Soldering Iron
0 Answers
Suddenly stopped turning on

unanswered FixHub Smart Soldering Iron 0 Answers

Guhlius 13

Commented

commented by Guhlius

iFixit Soldering
1 Answer
FixHub Smart Soldering Iron Offline Configuration

iFixit Soldering 1 Answer

Kris Rodriguez 309.2k

Commented

commented by Kris Rodriguez

FixHub Smart Soldering Iron
0 Answers
Soldering Iron failed firmware update

unanswered FixHub Smart Soldering Iron 0 Answers

DanJ 500.3k

Commented

commented by DanJ

iFixit Soldering
1 Answer
Unable to Power on - "Battery Error - Tool Shutdown"

accepted iFixit Soldering 1 Answer

Joe Schmoe 25

Commented

commented by Joe Schmoe

FixHub Portable Soldering Station
2 Answers
FixHub stuck in "Firmware update needed" loop after successful update

accepted FixHub Portable Soldering Station 2 Answers

Herman Junior

Answered

answered by Herman Junior

FixHub Portable Soldering Station
1 Answer
Intermittent "Tool Error: Sensor Disconnect" (Error #5) during heating - FixHub SLD101

FixHub Portable Soldering Station 1 Answer

Kris Rodriguez 309.2k

Commented

commented by Kris Rodriguez

FixHub Portable Soldering Station
1 Answer
Touch-Safe indicator blinking blue.

FixHub Portable Soldering Station 1 Answer

ofGlamis

Commented

commented by ofGlamis

FixHub Portable Soldering Station
2 Answers
Will my HP 65W adapter work with this?

accepted FixHub Portable Soldering Station 2 Answers

Nick 103.2k

Accepted an answer

answer accepted by Nick

iFixit Soldering
1 Answer
An unfinished version update may leave the device unusable

accepted iFixit Soldering 1 Answer

Niv 37

Commented

commented by Niv

FixHub Portable Soldering Station
0 Answers
Future heat set insert tip(s)?

unanswered FixHub Portable Soldering Station 0 Answers

Greg Rickman 13

Asked

asked by Greg Rickman

FixHub Portable Soldering Station
4 Answers
Issues with latest Firmware Update

FixHub Portable Soldering Station 4 Answers

Kris Rodriguez 309.2k

Commented

commented by Kris Rodriguez

FixHub Portable Power Station
4 Answers
FixHub battery - replace cells

accepted FixHub Portable Power Station 4 Answers

Hugo Bringel

Commented

commented by Hugo Bringel

FixHub Portable Power Station
0 Answers
Station Error, Update firmware

unanswered FixHub Portable Power Station 0 Answers

Audrius 47

Commented

commented by Audrius

FixHub Portable Power Station
0 Answers
FixHub completely dead after being left unused for about 5 months?

unanswered FixHub Portable Power Station 0 Answers

Clee 13

Asked

asked by Clee

FixHub Portable Soldering Station
1 Answer
Improvements suggestion (Web interface + Second soldering)

FixHub Portable Soldering Station 1 Answer

Sam Hiatt 61

Answered

answered by Sam Hiatt

Ryobi ONE+ 18V PCL946 Soldering Iron
0 Answers
Red light blinks rapidly,but doesn't heat up at all?

unanswered Ryobi ONE+ 18V PCL946 Soldering Iron 0 Answers

David DeLong 13

Asked

asked by David DeLong

iFixit Soldering
1 Answer
IRON Firmware version mismatch

accepted iFixit Soldering 1 Answer

David F

Commented

commented by David F