I have disconnected the hard drive from the mac board and i would like to connect it to another computer as external drive, so i can copy the data that i have.
These drives though are having a very small pin connector (not the usual SATA) . Is it possible to find a cable that connects it to USB?
thank you
Is this a good question?
Rep: 26.3k
152
71
50
I found a number of enclosures to turn this into a USB external hard drive. Click here for the cheapest. Click here for the next cheapest. Click here for pricing from a number of venders selling them.
Was this answer helpful?
+ good for external backup
Rep: 685.3k
3.4k
1.1k
2.6k
I would check with OWC to see if this adapter will work for you: http://eshop.macsales.com/item/NewerTech...
Was this answer helpful?
Rep: 1
2
1
1
The A1237 uses a zif-40 interface. The a1304 uses a zif-24. Be sure you check what interface you have before you just by the adapter or another drive It would be smart for ifixit to carry some zif 24 adapters in stock HINT HINT
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 3,041
1 Comment
This question was migrated from http://meta.ifixit.com/Answers.
by iRobot