Panasonic LUMIX DMC-LX100 Troubleshooting
Panasonic released this camera in November 2014 with 4K video recording and 12.8 MP resolution.
- The device won't power on
- The device is not processing or storing pictures
- The screen isn't displaying photos
The device won't power on ¶
You are hitting the power button on the device, but it is not turning on.
Dead battery ¶
If the device is not powering on, the battery may be dead. To fix a dead battery, remove it and try charging it. If after you replace the battery the camera still will not turn on, the battery may be broken or faulty.
Broken battery ¶
If your battery is full and will not turn on, or will not charge at all, you'll need to replace the battery with a new one.
Disconnected power button ¶
If you have replaced the battery and the device is still not powering on, the power button may be disconnected from the motherboard. If this is the case you will need to disassemble the device to reconnect the power button to the motherboard.
Failed motherboard ¶
If your device is still not turning on, your motherboard may have failed. To fix this problem, you will need to replace the motherboard.
The device is not processing or storing pictures ¶
You are pressing the shutter button to take photos, but the camera isn't taking or displaying photos.
Full SD memory card ¶
If your camera is not storing pictures and a message is popping up on your camera screen saying that you have no memory space left, you need to buy a new memory card. To replace the memory card, take out the old memory card, and put in the new one.
Missing SD memory card ¶
If your camera is not storing or taking photos, your device could be missing memory card. Check the memory card slot in your camera and insert an empty card to store pictures on.
Disconnected ribbon cable ¶
If your camera is not storing photos, the ribbon cables that look like film inside the camera that connect everything to the motherboard may be disconnected. You will need to disassemble the camera to reconnect the ribbon cables to the motherboard.
Broken motherboard ¶
If the ribbon cables are all properly placed on the motherboard but the camera is still not storing pictures, the motherboard may be faulty. Refer to the motherboard replacement guide to replace it.
The screen isn't displaying photos ¶
You are taking photos, but the LCD screen is not displaying them.
Cracked screen ¶
If the screen is cracked or visibly broken into more than once piece, then you will need to replace the screen in order to properly display photos again.
Disconnected from motherboard ¶
If the screen is in good physical shape and is still not displaying photos, it is likely because there is a disconnect between the camera's computer and the screen. In this case, you will need to disassemble the camera to reconnect the screen's ribbon cables to the motherboard.
Failed motherboard ¶
If the screen is still not displaying pictures then your motherboard may have failed. If this is the case, you will need to replace the motherboard to fix the problem.