Introduction

Are you pressing the power button but your camera stays turned off? Replacing the battery is a quick fix that should solve this problem.

Looking at the bottom of the camera, slide the OPEN/LOCK switch to the left into the OPEN position. The battery housing door should swing open. The battery housing door should swing open.
  • Looking at the bottom of the camera, slide the OPEN/LOCK switch to the left into the OPEN position.

  • The battery housing door should swing open.

Add Comment

Flip the inside switch up to release the battery. Flip the inside switch up to release the battery.
  • Flip the inside switch up to release the battery.

Add Comment

Grip the edge of the battery and pull it out.
  • Grip the edge of the battery and pull it out.

  • Use a LUMIX Panasonic DMW-BLE9PP Battery Pack for replacement.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Olivia Hillman

Member since: 01/11/2016

198 Reputation

1 Guide authored

Team

Cal Poly, Team 70-4, Forte Winter 2016 Member of Cal Poly, Team 70-4, Forte Winter 2016

CPSU-FORTE-W16S70G4

4 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 11

Past 30 Days: 59

All Time: 739