ANKER SoundCore Troubleshooting

what can I do to stop it from beeping?

My Bluetooth transmitter is never found in my iPhone 8

What do I do if one side of me earpods are louder then the other making it to where the volume is more on the quieter side doesnt work

Worked for me, thank you.

bass button flashing and has no bass??? please help

Blue tooth no longer turns on…Not sure what to do

Is there any way to turn it on other than the power button? my power button is completely broken

After about 6 months my unit suddenly failed to show up on my phone and laptop. A technician at Amazon advised me to press bluetooth and volume up for 15 seconds. That seemed to reset the unit. This piece of advice is not to be found in the manual!

(I was first advised to power off the unit and then hold the power button for 35 seconds.)

On a pair of Soundcore Motion+ speakers that are paired, sound goes off on one of the speakers for a second or two, then comes back. This happens occasionally. It still happens if I switch the speaker that is connected to the sound source. Please add a solution to such an error.

I have Soundcore Trance, and I’ve generally had a good experience with it. However, I do get a very annoying error over bluetooth, even when the speaker is just a few feet away from my phone or computer with nothing in between. Every song will start extremely quiet, and stay that way until I change the volume, then it will return to its normal levels. I have the same problem whether it’s set Indoor/Outdoor and with Bass Boost on or off. It’s very frustrating, and has led me to ignore the bluetooth aspect of this speaker. I would not recommend buying Soundcore products until I can find a solution to this massive problem.

Suddenly had loss of bass sounds with new buzzing sound. Any ideas?

OMy Anker sound core wont char on my computer. All the cables are in securely.

My Anker Soundcore will not charge or work I have all the cables in securly into my computer.

Will only stay on if you hold down the power button. Turns off as soon as you let go

Please help my Sound core 1 won't poweroff off and i try to disconnect the battery it return to normal but for few minutes it will stop and cant power off.

I own a soundcore wakey. It’s time however goes way too fast. The moment I disconnect my phone it ‘s time starts acting wierd and 1 minute passes by on it in about 20 to 30 seconds of real time. Please help me on this issue.

Soundcore 2. The base is crackling like an old car speaker.

The headset is pairing and I'm hearing it pairing but I can't hear the music from my device. What can possibly e the issue?

I reset the headset a few times now but still nothing.

The LED is constantly blue, but it will not power on/off or connect to anything

Why does my speaker turn off completely when I plug it in to charge my party rave doesn't

My soundcore earbuds i have keep flashing white slowly when there connected to things

Airpods dont shut off when I place them in the charging case

Will not work on laptop, even though it did before my laptop updated. Works on my phone. BT menu say my laptop is recognizable as… but the name doesn’t come up on list of devices to connect. Blue light just flashes. No problem with phone.

I mistakenly install flare + software on my flare device now it doesn't play out sounds and can't connect to pc

Soundcore motion +question: pairing is ok but after several seconds, the power goes off: please help

In my soundcore q10 I hear some distortion at Full volume and bass up enabled. Is it ok or my headphones are faulty.

Its not turning on, if i cunnect to the charger the blue light is on only otherwise no sign on life

dongle does not work on a ultra clear portable conference speaker, can the dongle be exchanged for a working unit?

Can you pair rave and a rave+ together???

listening to audio book. first few words of a sentence and last few words are spoken from the speaker. Middle if the sentence goes silent. It is a weird problem. Tried restarting, repairing, connecting disconnecting.

Mine is trying to connect both separately I have no clue how that’s okay and how it isn’t mentioned once.

How to factory reset soundcore flare

My ipad does not see my soundcore U@ headphones but does see other devices

I’m having trouble with Party Mode on my two Flare 2s I have. They were working splendidly for a week and then they just stopped pairing with each other. I even took them back and go new ones and still nothing. I did a firmware update on both of them and still nothing. I’ve even reset the devices, “forget Bluetooth” and reconnected it and still nothing. It’s driving my crazy because I have two but can’t pair them. Help!!

Won't skip track no matter how many times I try the double press on left A1 bud. Just keeps stopping and thnen starting the same track.

Mine won't turn on and whenever I try to charge it the light flashes a dim blueish reddish color

My right earpiece doesn’t work and I’ve done everything from repairing to cleaning. This is the worst product ever—a waste of money. Now I have to find a way to recycle it. Customer service isn’t helpful either. They don’t know what to do as well.

i did firmware update and now it wont play at all and the top arrow looking button is staying on. it wont even beep now,

soundcore flare im using.

My new anker powerconf will not pair with my MacBook air. Any suggestions?

Rave mini wont turn on how do you reset it. I cant press all the buttons at the same time to many buttons and not enough room to fit both hands in

How do I turn up the volume independently? Right speaker significantly loader than the right.

My speaker keeps saying “117”. What does that mean?

So I have soundcore vortex and if I’m listening to something where sound is intended only for the left ear, the right speaker will click and pop really loudly. It also makes this weird drip sound but I know it’s not water. This only happens on the right ear though. If sound is played only into the right or in both it’s fine. Please help.

The power button is not working at all what can i do i pushed all the buttons at once a then power still not working

When I receive a call my sound core keeps repeating hello,hello hello

the power on not working..even i press all the botton

Sound works for media but no sound heard for calls.

Music stops from for half a second every 20 minutes or so what's the problem

The power button is flashing red while it's charging. Any idea what this means?

I can't pair without using the &&^&^$^ app, my screen has a small deadspace which takes up the &&^&^$^ add device button, make your $@$* &&^&^$^ bluetoothspeakers pair without your $@$*!& &&^&^$^ designed app

Press and Hold All Buttons at the Same Time...I tried that,it won't on.

What else should I do?it's becoming tiring.

Led flashlights not blinking and not charging.

Battery high

Still won't connect

USB playback stops after 30 seconds. Why?

The only reason I bought this is to play my mp3s from my USB stick.

Day old Anker boosters..sound died PLEASE HELP

It's making cracking sound

J'ai acheté 4 soundcore rave neon je peux conecté 2 speaker je peut pas conecte les 4 speaker je suis déçus vous dite des mensonge ancolère je les ramener au cosco pour remboursement pas content pas content !!!

It tun off automatically under 30 second. What can I do

Mine beep whenever I type pls help this is so annoying and it does this ever once in a while at random…

My Anker soundcore pro is continuously flashing blue light while playing music and then it will turn of within 10 minutes automatically 😞

My mini is blinking red . It turns on and plays music for a few seconds and then shuts off and while playing the other button is solid blue? Still connects and plays for about 30 seconds

My speaker “select pro “ which showing automatically turns on is there any trouble shoot that I can do

I cannot play my Soundcore Select Pro and Soundcore Flare 2? I had them both playing together and now they will not play together?

Speaker will not stay connected to Bluetooth, when the charger is not plugged in. I have looked all over, and have done the troubleshooting ideas of disconnecting Bluetooth, and resetting the speaker.

Is there a fix, or should I find a new speaker?

Thank you for telling me how to pair my Anker speaker to my MacBook Pro!

Power on switch is red will not turn on new Soundcore select pro?

My motion boom plus has stopped working after 5 months Switches on then off after a couple seconds

when i turn on my anker soundcore 1, that said: one one seven, and when i playing music, that said 1 1 7 too, how can i fix that, i live in Viet Nam :( pls help me

I have had three Sound core by Anker- Life U2i Wireless Neckband Headphones in the last three months, and all of them had the same problem of not working right ear bud after one month of use. I was wondering if this is a known problem in them, or this is something that might be an easy fix. Honestly, I like everything about them, but I feel like I am wasting my money on them.

Is this an easy fix issue, or I have to buy a new one?.

Power button not working. I held all buttons for 30 sec and then did power button Still power

my speaker turns off randomly during playing music also it cannot be turned off... if you try to turn it off it we restart on its own. do i have any solutions.

Soundcore speaker the blue light will not stay on

It charges then pops and shuts down and won’t turn on again until you charge it again for a couple of minutes, then all four lights come on so I try to connect up it pops and goes dead??

My Bluetooth speaker is not turning off.The light is always on and there is humming sound from the speaker.I tried everything,but nothing is working.

My Anker SoundCore One(A3102011) Bluetooth Speaker is not working/frozen.I am not able to connect my speaker to any of my devices.The status indicator on the speaker is always on red.On pressing down the power button only the intro/starting tune is heard repeatedly.There is also a buzzing or humming sound coming from the speaker.Please help me find a solution for this issue.

This support info is rediculous

My speaker is the round sort. It doesn't have a bluetooth button !

Mine wont turn on or charge just stop an now it wont do nothing

I took my soudcore select on a plane and the subs are stuck pushed in.

Thanks... it has started now 🙂

When I put the power on the headphones are not charging and the red light does not appear what do I do

My cell phone is OnePlus pro 7t I'm trying to connect my new headphone soundcore Life U2i, It working for few minutes and stoped automatically without any interfere from me.

Resting the speaker and Bluetooth over and over again and was failed again.

My right pod is not working and I've applied all steps

Anker Soundcore starts playing, then randomly cuts out for a few seconds, then start playing again. Phone is right next to it and not moved. Any fixes?

my soundcore earbuds working both perfectly on my iphone but not on my ipad other than one is, the right ear. No problem before on both devices but and neither on parring.

Both mini 3 lights are blinking blue. Both show up on my laptop bluetooth. One speaker plays, but the second will not link up to the one playing.

This happens occasionally. Ordinarily both mini 3 speakers connect to my laptop and are paired together properly.

soundcorelife q10 base up button not working after i connected aux cable to computer

I have a soundcore flare+ that will not turn on what can I do to fix it