Introduction

This is a Teardown of my old broken Samsung Galaxy Pocket (GT-S5300)

This teardown is not a repair guide. To repair your Samsung Galaxy Pocket (GT-S5300), use our service manual.

  1. Remove the battery cover
    • Remove the battery cover

    • Then remove the battery

    Add Comment

  2. Remove all 4 screws
    • Remove all 4 screws

    what is the screwsize for this, please?

    Jett Jusay - Reply

    • Slide a guitar pick between the sliver bezel and the rear of the phone

    • Slide it all the way around until the rear is loosened from the logic board and screen

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove LCD connector

    Add Comment

    • Remove logic board from screen by lifting the logic board up and removing the digitizer connector

    Add Comment

    • Remove the 5 screws to remove the shield

    Add Comment

    • Remove what seems to be the antenna from the logic board

    Add Comment

    • Slide guitar pick between the digitizer and lcd

    • Make sure not to get under the black adhesive on the back be the digitizer

    • At the top of the digitizer there is a circuit be careful up there

    Add Comment

    • So that's my teardown for the Samsung galaxy pocket (GT-S5300)

    Add Comment

Ryan

Member since: 02/08/2014

360 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 5

Past 7 Days: 16

Past 30 Days: 40

All Time: 10,757